Metal Bars Sheets Shapes Mil-Specs - FSC 95G

DOD-HDBK-249 - Metals And Alloys, Rapid On-Site Identification Of (Recommended Procedure For Chemical Spot Testing And Associated Physical Tests To Verify Metal Alloy Classification) (Metric)

This handbook describes the equipment and procedures for rapid on-site identification of metals and alloys. These procedures are not intended for use when quantitative chemical analysis is required, but will provide a reliable means of identifying the most common categories of metals and alloys.

FED-STD-146 - Tolerances For Copper And Copper Base Alloy Mill Products (S/S By Sae-Mam2221, Sae-Ams2221, Sae-Mam2222, Sae-Ams2222, Sae-Mam2223, Sae-Ams2223, Sae-Mam2224 And Sae-Ams2224)

This standard contains dimensional tolerances for copper and copper base alloy mill products.

FED-STD-151 - Metals; Test Methods (S/S By Astm-E498, Astm-E427, Astm-E515, Astm-A630, Astm-A309, Astm-A376, Astm-B117, Astm-G69, Astm-G47, Astm-E1282, Astm-E172)

FED-STD-182 - Continuous Identification Marking Of Nickel And Nickel-Base Alloys (See Notice 3 For Replacement Information)

FED-STD-184 - Identification Marking Of Aluminum, Magnesium, And Titanium (S/S By Sae-Ams2808, Sae-Ams2809, And Astm-B666/B666M)

FED-STD-185 - Identification Marking Of Copper And Copper Base Alloy Mill Products (S/S By Sae-Ams-Std-185)

FED-STD-245 - Tolerance For Aluminum Alloy And Magnesium Alloy Wrought Products

FED-STD-66 - Steel: Chemical Composition And Hardenability (S/S By Sae-Air4127)

This standard, as referenced in the applicable product specifications in procurement documents, contains: (a) A catalog of the standard carbon steels, alloy steels (including H-steels), and stainless and heat-resisting steels that are designated by chemical composition, or (for H-steels) by chemical composition and limits by reference to standard industry documents. (b) Rules for designating the chemical content of carbon steels, alloy steels, and stainless and heat-resisting steels that are not classified as standard.

MIL-A-12545 - Aluminum Alloy Impacts (S/S By Astm-B221)

MIL-A-15153 - Aluminum Base Alloy Die Casting (Use Qq-A-591)

MIL-A-21999 - Aluminum Alloy Investment Castings

MIL-A-799 - Aluminum, High-Purity, Wrought

MIL-A-8705 - Aluminum Alloy, Bare And Alclad 2024(24S), Artificial Aging Of (Supersedes A-A-42)

MIL-B-18343 - Brass Castings, Leaded Semi-Red (Ornamental Bronze) (Use Qq-L-225)

MIL-B-892 - Bronze, Phosphor, Rolled Or Drawn: Bars, Plated, Rods, Sheets And Strips (S/S Qq-P-330)

MIL-C-18482 - Carbide Stocks, Bearing, Cemented, Naval Radioactive System Service

MIL-C-19052 - Cleaning And Protecting Interior Non-Machined Surfaces Of Castings And Weldments

MIL-H-6088 - Heat Treatment Of Aluminum Alloys (S/S By Sae-Ams-H-6088)

This specification covers the requirements and recommendations for the heat treatment of aluminum alloy rolled, extruded, forged, drawn, and cast product (see 6.1 and 6.5.1). It does not cover the requirements for the heat treatment of aluminum alloy parts (see 3.4).

MIL-H-81200 - Heat Treatment Of Titanium And Titanium Alloys (S/S By Sae-Ams-H-81200)

This specification covers the heat treatment of titanium and titanium alloy products, including wrought and cast products, by material producers. This specification also covers furnace equipment requirements, test procedures, and general information for heat treating procedures, heat treating temperatures, and material test procedures for the heat treatment of titanium and titanium alloys.

MIL-HDBK-270 - Metallic Materials For Low Magnetic Applications, Magnetic Permeability And Electrical Conductivity, Characteristics Of (Metric)

This handbook provides the following technical data and information for metals and alloys (in particular, aluminum, copper, nickel, and titanium alloys, and corrosion-resisting stainless steel): (a) Common name. (b) Commercial designation. (c) UNS (unified numbering system) number. (d) Chemical composition. (e) Applicable Government and commercial specifications. (f) Normal and other magnetic permeabilities at selected percentages of cold-working. (g) Electrical conductivity. (h) Magnetic permeability and electrical conductivity data source.

MIL-HDBK-693 - Magnesium And Magnesium Alloys

The purpose of the Materials Handbook is to provide, in condensed form, technical information and data of direct usefulness to engineers and designers of military equipment.

MIL-HDBK-697 - Titanium And Titanium Alloys

The purpose of this handbook is to provide, in condensed form, technical information and data of direct usefulness to design engineers. The data, especially selected from a number of government and industrial publications, have been checked for suitability for use in design. Wherever practicable, the various types, classes, and grades of materials are identified with applicable government specifications. The corresponding technical society specifications and commercial designations are shown for information.

MIL-HDBK-698 - Copper And Copper Alloys

MIL-HDBK-723 - Steel And Iron Wrought Products

Mil-Hdbk-723A contains technical information and data pertaining to the wrought products of three ferrous materials; wrought iron, carbon steels, and low alloy steels.

MIL-HDBK-8 - Steel And Wrought Iron Products (Use Mil-Hdbk-723)

MIL-M-12286 - Macroetch Test And Macrographs For Resulphurized Steel Bars, Billets And Blooms

MIL-M-47181 - Molecular Structure Stabilization, Procedure For

MIL-N-4498 - Nickel-Copper Alloy, Castings (S/S By Qq-N-288)

MIL-P-47226 - Plating, Copper, Electroless (For Non-Conducting Material)

MIL-S-11988 - Steel Forgings And Castings For Recoil And Recuperator Cylinders

MIL-S-15073 - Steel, Alloy (Chromium And Nickel Chromium), Bars, Forgings And Finished Pieces

MIL-S-18262 - Steel, Corrosion Resisting, Radioactive System Service

MIL-S-19657 - Steel Forgings, Photomicrographic Standards For

MIL-S-19658 - Steel, Hot Worked, Photomacrographic Standards

MIL-S-22494 - Steel Forgings, Carbon And Low Alloy, For Pressure Vessels, Nuclear Plant Service

MIL-S-23495 - Steel, Carbon, Extrusions, Structual For Ships (For Future Acquisition (S/S By Mil-S-22698)

MIL-S-46034 - Steel, High Strength Wrought (For Recoilless Rifle Components)

MIL-S-47180 - Seal, Steel, Glass To Metal, For

MIL-STD-1601 - Method For 5/8 Inch Dynamic Tear Testing Of Metallic Materials (S/S By Astm-E604)

MIL-STD-192 - Alloy And Temper Designation System For Wrought Aluminum (Use Usas H35.1-1967)

MIL-STD-2034 - Qualification Requirements For Material Specifications

This standard establishes the procedure and requirements which must be met for a supplier to qualify to produce material to certain military specifications. This standard is only invoked by material specifications; see Appendix A. |

MIL-STD-367 - Armor Test Data Reporting

The purpose of this standard is to provide acceptable procedures for reporting armor test and armor welding data when such data is required from contractors supplying armor or armor products to the government.

MIL-STD-455 - Alloy Designation System For Wrought And Cast Copper And Copper Alloys (S/S By Sae-Hs1086)

MS35628 - Thinner, Synthetic Enamel

MSS-SP55 - Steel Castings For Valves, Flanges & Fittings & Other Piping Components (Visual Method) Quality Standard For

QQ-A-245 - Aluminum And Aluminum Alloy Wrought Products, Tolerances For (S/S By Fed-Std-245)

QQ-B-746 - Bronze, Phosphor; Bars, Plates, Rods, Shapes, Sheets, And Strips (S/S By Qq-P-330)

QQ-C-501 - Copper; Bars, Plates, Rods, Shapes, Sheets, And Strips (S/S By Qq-C-502 & Qq-C-576)

QQ-C-551 - Copper-Nickel-Alloy; Castings (S/S By Qq-N-288)

QQ-M-151 - Metals; General Specification For Inspection Of (S/S By Fed-Std-151)

QQ-M-31 - Magnesium Alloy Bars, Rods, And Special Shaped Sections, Extruded (S/S By Astm-B107)

QQ-P-330 - Phosphor Bronze Bars, Plates, Rods, Sheets, Strips, Flat Wire, And Structural And Special Shaped Sections (S/S By Qq-B-750)